Đế Giữ Cuộn Dây In 3D

My enclosures sits low to the ground, trying to drop a roll in the bearing roller that comes with a Prusa usually meant lying on the ground. This is a remix from a few different designs, mainly the one shown below. The spool holder I wanted should snap together, sit as low as possible with enough room for spools of varying dimensions and be free standing.

Print instructions

Printed in PLA - Perimeters: 4 (possibly 1 to many, still learning and I did not want to print this again) - Infill: 20% (probably could have gotten away with 15%).

Reused 2x 608 Bearings received with printer.