Khóa điện tử cho tủ đựng Prusa Enclosure

By Samkruse_578108

Downloads: 0
Likes: 0
Views: 0
Remixes: 0
Comments: 0

Download all (.zip)· 15 files · 16.3 MB· 16.3 MB

Files 15 16.3 MB

Part_1_1766351114.gcodeGCODE · 1.3 MB
Part_2_1766351115.gcodeGCODE · 804.8 KB
Part_3_1766351116.gcodeGCODE · 2.5 MB
Part_4_1766351118.gcodeGCODE · 1,002.2 KB
Part_5_1766351119.gcodeGCODE · 300.2 KB
Part_6_1766351120.gcodeGCODE · 730.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #13013
Category: Máy In 3D
Published: 03/12/2025
License: Creative Commons — Attribution

Description

Some time ago I checked what is not yet available on Printables. And that's when I noticed that there is no electronic lock for the Prusa Enclosure yet. And here it is. I designed it to be easily replicated. Even if you can't program, that's no problem. All you need is basic soldering skills and the right parts. You can find the instructions as a PDF under files. The sketch for the arduino is there too.

The parts needed are:

> a 4x3 keypad

>2x an electric lock (5V)

>an Arduino Nano

>Small cables

>the 3d printed parts

>some small screws

> small cable ties

>9v power supply