Hộp đựng Raspberry Pi 3b

By merakrom

Downloads: 1,232
Likes: 184
Views: 7,863
Remixes: 1
Comments: 0

Download all (.zip)· 4 files · 51.3 MB· 51.3 MB

Files 4 51.3 MB

raspberry_pi_3_b_plus_0.2mm_PETG_MK3S_6h13m_1767917639.gcodeGCODE · 8.1 MB
raspberry_pi_3_b_plus_1767917633.stlSTL · 449 KB
raspberry_pi_3_b_plus_v19_1767917635.f3dF3D · 41.2 MB
raspberry_pi_3_b_plus_v19_1767917638.stepSTEP · 1.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

Giá đỡ độ phân giải caoByvxk_1470197 · 06/22/2025

See all 1 remix

Details

Model ID: #128299
Category: Máy In 3D
Published: 06/22/2025
License: Creative Commons — Attribution — Noncommercial
Tags: raspberrypicase
raspberry
raspberrypi3

Show more tags Show fewer tags

Description

Raspberry Pi 3b case with holder for attaching to the frame of Original Prusa i3 MK3S+. The case has no screws and the case and the pcb inside is held together by placing it in the holder (the case can not be used on its own). The holder is attached to the frame with two M3 bolts.

The case it not suitable for Raspberry Pi 4, possibly for other versions of 3 but I don't have any so can't say for sure.

The pcb can easily be accessed by just lifting the case out of the holder. The case ha a slot for the Raspberry Pi Camera flex cable.

The ridges on the case that fits into the slots in the holder are printed separately and glued on to make the print easier.

They ridges have a right and a wrong orientation, make sure to compare with slots in the holder to get it right and try it before adding any glue. The shorter side of the triangle should be on the side of the holder.