
Giá đỡ cáp ribbon cho máy in 3D Ender 3 S1 Pro
- Downloads
- 643
- Likes
- 86
- Views
- 3,177
- Remixes
- 2
- Comments
- 9
Files 4 15.1 MB
- Lower_Support_-_1_0_1766478303.STLSTL · 1.7 MB
- Middle_Support_Bottom_-_1_0_1766478306.STLSTL · 3.2 MB
- Extruder_Support_-_1_0_1766478307.STLSTL · 4.2 MB
- Middle_Support_Top_-_1_0_1766478308.STLSTL · 6 MB
Make a variant with AI
Build another version of this model.
Remix versions 2
Giá đỡ cáp cho Ender 3 S1 (Cable Support)Byshelby8_292152 · 04/19/2026
Giá đỡ cáp ribbon với kẹp cho máy in 3DByFalkOnPC_644935 · 03/12/2025
Details
- Model ID
- #12632
- Category
- Máy In 3D
- Published
Description
Complete ribbon cable support system for the Ender 3 S1 Pro.
I wasn't a huge fan of the existing offerings for ribbon cable supports as they still put stress on the cable, especially when taking the cable in and out of the clip. The “Extruder Support” is my take on the standard ribbon cable clip to address that.
I also needed to minimize the footprint of my printer so I created some (admittedly overly complicated) brackets to twist the cable so it lays parallel to the base instead of perpendicular. This allows you to place the printer right up against a wall. The “Middle Support” replaces the stock ribbon cable clip on the Z axis. This part prints in 2 pieces for more simple printing; they should just slide/snap together with a slight amount of force. The "bottom support" clips into the channel on the Z extrusion so no hardware is required.
Printed in Overture Blue PETG.
"Extruder Support" and “Bottom Support” print with no supports.
“Middle Support” needs support in a couple of places for overhangs.
Please consider supporting the maker for the time/materials spend developing these parts.
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 15.1 MB
- Largest file
- 6 MB
9 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


