Khớp Nối Vòng Lấy Mẫu

Print instructions:

• Material: PLA
• Layer: 0,10
• Perimeters: 2
• Infill: 15 %
• Supports: No

For better adhesion to the hotbed, I recommend using a brim. Also consider using a slower print speed, more details in the attached 3MF file.

Part list:

• PVC coated wire [ø 2.2 mm]
• Press sleeve

Press sleeves

Assembly instructions:

The first end of the wire is firmly glued to the screw. I used epoxy glue.

I threaded the second end through the nut and put a small tube on the end of the wire and squeezed it with pliers. I made a tube from press sleeve. 

Important, the wire must rotate in the nut!

Custom modification:

If you want to modify the model, I am attaching the STEP file and a link to my OnShape.

OnShape Link

You can customize the model by simply changing variables.

Note:

Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.

Happy printing!