Giá Đỡ Camera Eufy 2K Cho Vỏ Máy Prusa Original

Here is a simple mount that allows you to mount your Eufy 2K cam inside the Prusa Original Enclosure using the top plug hole. It works for both the front or rear top plug hole. The self guiding pins should ensure the mount stays in place.

Installation

• I would suggest the Eufy 2K can be affixed to the mount prior to installation. The camera body can serve as the handle to maneuver the mount in the next step.
• Holding the camera body, insert the feet through the top plug hole as shown in the photo.
• Rotate 90° to align the feet with the guide pins with the existing sheet metal holes.
• Gently nudge and align the pins to seat the mount properly.
• Adjust your camera angle as desired. 

Printing

I printed my mount using PETG given the heat inside the enclosure. I did not enable support or brim.

Source

The mount legs used in this model came from this shared object. I designed the rest of the mount. If the admins or source owner feels this should be deemed as a remix, please let me know. I didn't flag this model as a remix since this is almost entirely different from the source object.