Mount Ray Lướt cho E3D Hemera

Final Versions Uploaded

E3D Hemera Linear Rail Mount designed for the Anycubic Chiron but can probably work for other Printers.  It features BL Touch Mount, EBB42 Canbus mount, PG7 Umbilical mount and endstop mount for the Chiron.  I designed it to be used mostly with heat set inerts and M3 hardware to make it modular. if you need a different probe just redesign the attachment instead of the entire mount.  

(Update)

Added a Filament Sensor and mount for it.  edited some parts for better printing.

Filament Sensor requires a ECAS fitting for top bowden, D2F-01 and a 5.5mm Ball Bearing. 

Cad files are updated and have added STL's.  All parts are orientated the way i have chose to print them.  Umbilical Mount, Linear Rail Mount and Ebb42 Mount all were printed with supports. everything else printed well without supports. may provide STL's with built in supports at a later date if anyone needs them.

Still waiting to mount it and test it out so only use with caution.

Printed out of ASA

.2 Layer height

40% Gyroid infill

4 Perimeters

5 Top/Bottom Layers

Cooling fan i have chosen to use i remodeled and posted here. https://www.printables.com/model/694640-hemera-fan-duct

(Update)

Everything is working very well and tested. I did use a few washers to shim th BLtouch a bit lower. I have decided to leave the model this way to allow anyone using this to shim as needed for there bl touch. 

I have also added files for a extra long belt mount since my belt was previously cut for a different mount i needed a bit more length. the slide stop is also different for it to get a bit more ridgidity.

also added Zip Tie clips out to BLTouch to make wiring a bit cleaner.