Mồi Câu "Whopper Plopper" Tự In Dễ Dàng

Summary

Easy to print and build Whopper Plopper. 70mm long, but easy to upscale. Use 0.6-0.8mm wire for 100% scale, 0.8-1mm wire for 120% scale and 1-1.2mm wire for 140% scale. Only use spring steal wire!

Update:
removed the support structure, so the hole is not blocked anymore

Print settings:
100% infill
2 outer lines
no support
no top and bottom layers (only important for S3D users)
Print orientation like on pic 4