
Chân đế điều chỉnh Ikea Lack Prusa
- Downloads
- 95
- Likes
- 18
- Views
- 1,166
- Remixes
- 1
- Comments
- 0
Files 2 38.5 MB
- adjustable-ikea-leg_015mm_petg_mk3s_6h14m_1766006872.gcodeGCODE · 38.3 MB
- adjustable-ikea-leg_1766006871.stlSTL · 241.4 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #115752
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
2021 update:
Now that I have used these legs for a while, I can comfortably say they have been keeping my Ikea lack enclosure leveled. You only need to keep spinning the legs until you start to feel some force, and almost every time you have reached a leveled elevation on all legs. I haven't had the need to touch the legs for a year now.
Instructions:
These legs are made in such a way that you have to place a metal nut inside of the model, while it is printing. Which is why it is advised to use my gcode, since it is programmed to stop once you need to place the nut, inside of the print.
If you for some reason need to make your own gcode settings a STL has been included.
This model does not need support, there is a 1 layer of filament inside of the 3d models, that you have to pick out after printing it before using it.
You are going to need these materials:
1.
https://www.amazon.co.uk/gp/product/B07HBZLKPJ/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
https://www.amazon.co.uk/gp/product/B00O7P206Q/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
https://www.amazon.co.uk/gp/product/B07MPC5HM3/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Print instructions
25% infill, with brim. Printed with Prusament Jetblack PETG.
NO SUPPORTS
Print spec
- Formats
- gcodestl
- Model files
- 2
- Total size
- 38.5 MB
- Largest file
- 38.3 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -

-

-

-

-

-

-

-



