Hệ thống gắn điện thoại mô-đun cho Steam Deck

I wanted a way to mount my phone above my Steam deck screen.

From https://www.thingiverse.com/thing:4756060/files use:

• 1x Arm_-_Threaded.stl
• 2x Knob.stl
• 1x ball_joint_screw.stl
• 1x Frame.stl
• 1x Ball_Joint_02mm.stl
• 1x Frame_up.stl
• 1x tightening_screw_02mm.stl
• 2x Gewindeverbindung.stl

My part adds a 12mm screw to a steam deck spring mechanism (one of the Gewindeverbindung.stl screws into my part)

There are two versions:

1 combines the m12 hole with part of the spring mechanism of the deckmate. You will need to supply the top half of the mechanism and springs. (Try printing the springs with https://www.printables.com/model/350324-steam-deckmate-printable-springs)

The other is a standalone m12 hole with m2 SHCS holes to mount to a standard version of the deckmate spring. For this version you can also print the very handy https://www.printables.com/model/415558-springless-deckmate and screw my part onto it.

Print either as oriented or flipped upside down. Both require support.