Giá Treo Máy Đo Độ Ẩm Sterilite

This is a remix of two different models. I wanted to be able to hang my hygrometer without putting any holes in the Sterilite box.

I used the spacer_end model from the Modular Dry Box Dispenser, flipped it and connected it to the Drybox hygrometer mount model.

I altered the models by removing the screw holes from the hygrometer mount and made the spacer_end a little deeper to match the mount.

I printed this at .3 layer height with a .6 nozzle and it comes out just fine. A .2 height with a .4 nozzle would work too.

For my prints, I like to give it 3 walls and 3 top/bottom layers.

I also printed this with organic supports in PrusaSlicer for build plate support only.

Licensing Note: The models had different license types so I made this comply with the most restrictive of the two.