
Giá đỡ màn hình cảm ứng 7 inch cho Raspberry Pi
Remix of Vỏ case cho màn hình cảm ứng 7" SZFYDOSH 1024x600 By Baffo
- Downloads
- 54
- Likes
- 6
- Views
- 888
- Remixes
- 0
- Comments
- 0
Files 5 1.2 MB
- 20230822TouchScreenFront103X_1767606346.stlSTL · 103.2 KB
- 20230821TouchScreenBack_1767606347.stlSTL · 429 KB
- 20230821TouchScreenBack_1767606348.stpSTP · 34.3 KB
- Monitor_mountBackPlateComboN2_1767606349.3mf3MF · 340.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #10023
- Category
- Máy In 3D
- Published
Description
if using this 7 inch 1024x600 LCD D display with bracket-h Full viewing angle panel at 178 degrees for raspberry PI 3B + 4B
I used a Motedis angled Universal Monitor Mount VESA 75+100 for mounting on my 3060 extrusions on the Ratrig V-Core 3 ThreeFiddy.5
Add m3 heat inserts from the back for the Vesa and to the front for the cover
I added the stp file for the back, so you can add a chamfer for using countersunk bolts for the screen (I drilled them out a tiny bit after printing)
Also added .3mf file combining the angled mount with the backplate printable as one (SuperSlicer) and also an .stl file with even less holes, go bananas !
This is a remodel of my own https://www.printables.com/model/279988-szfydosh-7-pi-touchscreen-3030-case then again not.
I printed it in PETG (.3 layer with .5 nozzle, 3 walls, 30% gyroid infill, no supports)
Print spec
- Formats
- 3mfstlstp
- Model files
- 5
- Total size
- 1.2 MB
- Largest file
- 429 KB
0 comments
You may also like 12 models
See all-

-
New -
New -

-

-

-

-

-

-

-

-


