
Desiccant Container - SQ80x35x120
- Lượt tải
- 99
- Lượt thích
- 10
- Lượt coi
- 688
- Bản remix
- 0
- Bình luận
- 3
File 4 1,5 MB
- large_display_dessicant_container_-_sq80x35x120_b_1765744330.stlSTL · 387,4 KB
- large_display_dessicant_container_-_sq80x35x120_s_1765744331.stlSTL · 452,3 KB
- dessicant_container_-_sq80x35x120_screw_cap_1765744332.stlSTL · 255,6 KB
- dessicant_container_-_sq80x35x120_body_1765744333.stlSTL · 470,4 KB
Tạo biến thể bằng AI
Dựng một phiên bản khác của mẫu này.
Thông tin
- Mã mẫu
- #67576
- Danh mục
- Máy In 3D
- Ngày đăng
- Giấy phép
- CC BY-NC — Ghi công, phi thương mại
Mô tả
This desiccant box is sized to fit inside a display cabinet so that it is not visible and hides inside in one of the corners. This is effectively a remake of my "Desiccant Container with Screw Cap" - https://www.thingiverse.com/thing:3930740
The screw cap or flask design makes it very easy to change the desiccant.
Print instructions
Category: Containers Summary
Do you want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact details on our webpage.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom
Don't forget if you print something we have shared, to share your story and photos with us in return.
This desiccant box is sized to fit inside a display cabinet so that it is not visible and hides inside in one of the corners. This is effectively a remake of my "Desiccant Container with Screw Cap" - https://www.thingiverse.com/thing:3930740
The screw cap or flask design makes it very easy to change the desiccant.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: Prusa PETG Transparent
Notes:
Material and colour are not important, but I prefer to use Transparent filament to make monitoring the condition of the beads much easier.
The beads that I buy come Blue and change to a light pink as they get saturated.
Print with the main body standing up and the screw cap with the flat side down. If printed this way I don't use any supports.
Post-Printing
There is a single thickness layer that will bridge beneath the hole in the top. This negates the need for supports and ensures a clean start for the hole.
It needs to be removed after printing. I prefer to use a hot sculpt tool which also seals any loose ends.
Thông số in
- Định dạng
- stl
- Số file mô hình
- 4
- Tổng dung lượng
- 1,5 MB
- File lớn nhất
- 470,4 KB
3 bình luận
Có thể bạn cũng thích 12 mẫu
Coi tất cả-

-

-
Mới -

-
Mới -

-

-

-

-

-

-


