
Phone Camera Stand
- Lượt tải
- 195
- Lượt thích
- 46
- Lượt coi
- 1.303
- Bản remix
- 0
- Bình luận
- 3
File 15 54,3 MB
- Phone_camera_stand_part_6_1767165688.iptIPT · 459,5 KB
- Phone_camera_stand_part_3_1767165689.stlSTL · 9,7 MB
- Phone_camera_stand_part_5_1767165691.iptIPT · 108 KB
- Phone_camera_stand_part_5_1767165692.stlSTL · 2,5 MB
Tạo biến thể bằng AI
Dựng một phiên bản khác của mẫu này.
Thông tin
- Mã mẫu
- #59736
- Danh mục
- Dụng Cụ Tiện Ích
- Ngày đăng
- Giấy phép
- CC BY-SA — Ghi công, chia sẻ tương tự
- Thẻ
Mô tả
Here is my phone camera stand.
The stand is made so it enables rotation in two direction. Only non printable parts are 16mm M3 screw with nut and rubber band.
I used PLA.
The Part 1 (the base) was printed at 70mm/s 15% infill 0.2 resolution and 3 perimeters (0.4). I used support but i'm sure it can be done with out it as well. It came out very rigid.
About other parts.
Other parts were printed at 30% infill. Smaller parts were printed at slower speeds to get better results.
Part 3 has two versions one si for bigger phones one is for smaller. For most newer phones print the bigger version.
You need part 4 two times.
I included .ipt fills (inventor files) if somebody wants to fiddle with it.
The
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3
**Rafts:**
No
Supports:
Doesn't Matter
**Resolution:**
0.2
Infill:
base 15%, rest 30%
**Notes:**
Support probably not needed but it can result in better print when printing part 1 (base)
How I Designed This
Category: Gadgets
Thông số in
- Định dạng
- iptstl
- Số file mô hình
- 15
- Tổng dung lượng
- 54,3 MB
- File lớn nhất
- 10 MB
3 bình luận
Có thể bạn cũng thích 12 mẫu
Coi tất cả-
Mới -

-
Mới -
Mới -
Mới -
Mới -

-

-

-

-

-


