Tháp Trồng Cây Thủy Canh Modular (Modular Hydroponic Tower Garden)
Mô hình tháp thủy canh dạng mô-đun được đăng tải lại nhằm lưu giữ nguồn tài nguyên giá trị. Đây là giải pháp sáng tạo cho người đam mê trồng trọt, hỗ trợ đầy đủ tài liệu lập trình Arduino đi kèm.
Mô tả
Mô hình 3D Modular Hydroponic Tower Garden gốc do boundarycondition tạo ra hiện không còn truy cập được do tài khoản của người dùng đã bị xóa. Để đảm bảo nguồn tài nguyên giá trị này tiếp tục được sử dụng, mình đăng tải lại mô hình này kèm theo ghi nhận nguồn đầy đủ cho tác giả gốc. Mô hình này mang đến một cách tiếp cận độc đáo và sáng tạo cho việc trồng cây thủy canh, trở thành một công cụ hữu ích cho cả người mới bắt đầu lẫn những người trồng cây lâu năm. Bằng việc đăng tải lại mô hình, chúng ta có thể lưu giữ di sản này và đảm bảo mọi người tiếp tục được hưởng lợi từ sự sáng tạo của boundarycondition. Tên mô hình gốc: Modular Hydroponic Tower Garden Người tạo/đăng tải gốc: boundarycondition Liên kết gốc: https://www.thingiverse.com/thing:3405964 Dự án này được tạo bởi người dùng Thingiverse là boundarycondition và được cấp phép theo giấy phép cc-nc-sa. Cảm ơn @pandel_595670 đã chỉ ra rằng “Các thiết bị điện tử và lập trình Arduino liên quan của boundarycondition có thể được tìm thấy tại đây: https://github.com/laszlodaniel/ModularHydroponicTowerGarden”
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
Tìm hiểu thêm về giấy phép này tại http://creativecommons.org/licenses/by-nc-sa/4.0/
File mô hình
1-way_planting_module_hollow_without_m3.stl
1-way_planting_module_hollow.stl
1-way_planting_module.stl
2-way_planting_module_hollow_without_m3.stl
2-way_planting_module.stl
2-way_planting_module_hollow.stl
3-way_planting_module.stl
3-way_planting_module_hollow.stl
3-way_planting_module_hollow_without_m3.stl
4-way_planting_module_hollow_without_m3.stl
4-way_planting_module_hollow.stl
5-way_planting_module_hollow.stl
5-way_planting_module_hollow_without_m3.stl
filling_module.stl
filling_module_mod_01.stl
filling_module_cut.stl
filling_module_cut_mod_01.stl
module_spacer_80mm.stl
module_spacer_40mm.stl
module_spacer_120mm.stl
lid_without_holes.stl
lid.stl
dispenser_module_internal.stl
dispenser_module_external_02.stl
dispenser_module_external_01.stl
dispenser_module_external_01_without_holes.stl
cone_module.stl
stream_breaker_no-glue.stl
stream_breaker.stl
waterpump_hose_adapter.stl
standard_pot_02.stl
standard_pot.stl
standard_pot_raw.stl
standard_pot_for_4-5-way_planting_module.stl
jiffy-7_41_pot_raw.stl
jiffy-7_41_pot_02.stl
jiffy-7_41_pot_for_4-5-way_planting_module.stl
jiffy-7_41_pot.stl
Cup_FullWidth.stl
aquarium_adapter_id200mm.stl
ikea_muskot_pot_7_12_adapter_id240mm_full.stl
ikea_muskot_pot_7_12_adapter_id240mm.stl
persillade_plant_pot_9_12_adapter.stl
oestlig_plant_pot_14_12x14_12_adapter.stl
oestlig_plant_pot_13_12_adapter.stl
oestlig_plant_pot_12_12_adapter.stl
module_adapter_4_inch_pvc_pipe.stl
module_adapter.stl
Soporte_Rellenado.stl
Soporte_Cable.stl
TaponRellenado.stl
TaponCable.stl
Soporte_Basic.stl
Base.stl
Arm.stl
Ring.stl
RingHoles.stl
m3Spacer.stl
m3HeadCover.stl
HolePlug.stl
HolePlug-CableSlot.stl
filling_cap.stl
blank_cap.stl
blank_cap_no_handle.stl
Filtration_Mesh_Remix.3mf
filling_cap_symbol.stl
filtration_mesh_holder_01.stl
filtration_mesh_holder_02.stl
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Remix (0)
Có thể bạn quan tâm
Đang tìm các mô hình liên quan...
Chưa có bình luận nào. Hãy là người đầu tiên!