Skip to main content
F3D
Bản sao bộ phận giữ mũi tên Hamskea cỡ lớn 1

3 images

Thể Thao & Ngoài Trời

Bản sao bộ phận giữ mũi tên Hamskea cỡ lớn

By ludodg

Downloads
90
Likes
8
Views
739

Files 1 644.5 KB

  • LauncherBlade_v02_1765533587.stlSTL · 644.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I use an Hamskea Trinity on my bow (Mathews TRX38_G2).

Unfortunatly the provided arrow rest-blade, the part that actually holds the arrow, had slightly misalligned mounting holes (not on a perfect horizontal line).
This is not a problem when shooting, as you can tune the arrowrest and change the horizontal position a tiny bit …
But it distracts me everytime I draw the bow.

I have taken the reflex to check on the arrow on each draw … and seeing the arrowrest slightly tilted gets distracting.

So I designed a copy of the original and printed it with CFPA (nylon with carbon fiber). It is very strong and as this was designed by software, when printed, all holes were on the perfect position.
The original is certainly more stiff then the one I printed … but the printed one (see pictures) is more then capable to do the job and does NOT flex by the weight of the arrow.

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
644.5 KB
Largest file
644.5 KB

0 comments

See all