
DIY
Đèn LED hình khung tranh có thể in 3D
- Downloads
- 130
- Likes
- 33
- Views
- 1,044
- Remixes
- 1
- Comments
- 0
Files 4 30.2 KB
- LED-Strip_holder_1766526176.stlSTL · 3.8 KB
- Base_1766526177.stlSTL · 22.5 KB
- Cover_1766526178.stlSTL · 3.2 KB
- Template_1766526179.stlSTL · 684 B
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #9900
- Category
- DIY
- Published
Description
This 3D printable model seamlessly blends functionality and aesthetics, creating a unique lighting solution. Here are the essential details and materials required to construct this lamp:
Design:
- The lamp takes inspiration from a picture frame, resulting in a customizable and eye-catching lighting fixture.
- Whether you choose to laser-engrave the design onto acrylic or 3D print it, the lamp’s form resembles a classic picture frame.
Template:
- If you opt for laser engraving, ensure that the acrylic sheet is 100mm wide and 3mm thick.
- The height is flexible and doesn’t significantly impact the design.
- For 3D printing, use a generic Lithophane Maker (such as Flat Lithophane Maker).
- Recommended settings for the Lithophane Maker:
- Width: 100mm
- Options: No Border
- Maximum Thickness: 3.0mm
- The bottom 10mm of the image should be predominantly or completely black, as this part will be concealed within the holder.
Materials Needed:
- SP110E Controller: Essential for controlling the LED strip from your phone.
- SP110E Bluetooth Pixel Controller on Amazon/Aliexpress
- WS2812b LED-Strip: This strip serves as the vibrant light source. Consider using at least 60 LEDs/m, or even better, 144 LEDs/m for optimal illumination.
- WS2812B LED Strip (length min. 100mm) on Amazon/Aliexpress
- 5V Power Supply: Any 5V power supply will suffice since we’re dealing with a small number of LEDs and not a lot of current is needed.
- Consider using a USB to 5V (5.5/2.1mm) cable for convenience. You can find them on Amazon/Aliexpress
Assembly:
- No glue is necessary for assembly. Everything is press fit.
- For the SP110E controller, remove its casing to ensure it fits into the 3D printed parts.
- Refer to the explosion view of the entire assembly for guidance.
Enjoy creating your Picture Frame LED-Strip Lamp! 🌟🖼
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 30.2 KB
- Largest file
- 22.5 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-
New -
New -

-



