Skip to main content
F3D
Máy Tập Lực Siết Ngón Tay 1

5 images

Thể Thao & Ngoài Trời

Máy Tập Lực Siết Ngón Tay

By mtongnz_243883

Downloads
192
Likes
63
Views
1,551

Files 4 4.7 MB

  • open_15mm_1765458200.stlSTL · 1.2 MB
  • closed_12mm_1765458214.stlSTL · 1.2 MB
  • closed_15mm_1765458234.stlSTL · 1.2 MB
  • closed_20mm_1765458258.stlSTL · 1.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is my take on a crimp strength trainer.  I have big hands and it allows for 2 or 3 fingers - smaller hands might get 4 in there.

I have provided 4 sizes that I thought work well for my needs:  a 15mm open and 12mm, 15mm, 20mm closed backs.

These are designed for use with a 6mm rope, but should work fine with smaller.  Just note that a smaller rope will apply a more contentrated force on the print.  I made a loop and fed it through.  This lets me easily choke weight plates or a pull-up bar.

Printing:

Print on it's back.  I recommend ASA/ABS (maybe PETG) with 7 walls and 25-50% infill.  Layer height and top/bottom layers don't matter too much with these settings.  Check the slice preview to ensure there's no gaps between the edges (see screenshot).

I printed the open back in ASA with 7 walls (grey model).  It's super strong.  I haven't hung my entire weight on it yet (mainly as I can't hold that) but I'm sure it'd be OK.

The other 3 are all in PLA with 5-7 walls.  They all seem adequately strong but not as strong as the ASA.

Safety:

I've tested these with up to 20kg of weight and they seem fine but I can't guarantee the strength of yours - it depends a lot on how you print it.  I recommend testing them before loading with to much meight.  You really don't want plastic bits stuck in your finger.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
4.7 MB
Largest file
1.2 MB

0 comments

See all