
Vỏ Case BTT HDMI7 V1.2
- Downloads
- 846
- Likes
- 83
- Views
- 3,823
- Remixes
- 2
- Comments
- 0
Files 7 2.1 MB
- HDMI7V1_2_case_v4_1765761177.stlSTL · 411.9 KB
- HDMI7_bracket_v4.3_1765761178.stlSTL · 471.8 KB
- swing_arm_lg_a_v2_1765761179.stlSTL · 78.8 KB
- swing_arm_lg_b_v2_1765761180.stlSTL · 78.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Vỏ bảo vệ (case) cho màn hình BTT HDMI 7 v1.2Bybiglesp_306462 · 04/16/2026
Giá đỡ BTT HDMI7 V1.1 xoay được cho Voron 350Bynagolnad_202861 · 12/15/2025
Details
- Model ID
- #98226
- Category
- Máy In 3D
- Published
Description
I used the dimensions from the BIQU store page for this model since they do not yet have it on the github page. I actually printed a slightly different variation of this file since I used L adapters for both the HDMI and USB C ports which are now in different locations from the original screen. I increased the opening for them on this file as it was a tight fit on the original I printed.
The articulating arms are from the VoronDesign github but I did modify them a little to add additional clearance on my V2.4 350. Original length arm stls are found here since you will also need to print the lcd mount_foot a&b to which the arms attach : https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/revnull/rpi_7in_display_mount
I also tried a modified version (sort of a type of quick release) based off the bracket found above which can take a center magnet or the 4 M3 screws.
I used 8 M3x4mm heat inserts - 4 on the case and 4 on this bracket). Magnet version is untested.
Edit: Step file added - note the screen included in this I modelled with basic dimensions from the physical unit and the layout sketch from BIQU store website - it is not an official model from BTT.
Print spec
- Formats
- stlzip
- Model files
- 7
- Total size
- 2.1 MB
- Largest file
- 552.7 KB
0 comments
You may also like 12 models
See all-

-

-
New -

-
New -

-

-

-

-

-

-


