Cầu Trượt Gấp Mini

I used M5 hardware throughout, you'll just have to chase the holes with a tap for the flat sections, then tap the holes on the curved sections.

Ramp measures about 1 square foot, so not ideal to jump cars larger than 1/14 scale, unless you fancy yourself a precision driver. I've been using this with my Team Associated 1/28 scale off road car. You can also adjust the angle if you want to only use the bottom half of the ramp if you are driving things that are slow or getting the hang of it.

The face of the ramp can be coated with Flex Seal with some sand or other fine aggregate to make very grippy.

You can print everything or just the frame and laser cut the DXF files like I did for the full sized version.