
Nút Bấm Chụp Từ Xa - Canon EOS M50
- Downloads
- 25
- Likes
- 2
- Views
- 716
- Remixes
- 0
- Comments
- 0
Files 11 22.6 MB
- Plate_TriggerPusher_CANON_EOS_M50_1765999435.stlSTL · 1.1 MB
- X_TriggerPusher_Canon_EOS_M50_v12_1765999435.stepSTEP · 2.5 MB
- X_TriggerPusher_withColdShoe_Canon_EOS_M50_v13_1765999437.f3zF3Z · 2.9 MB
- Nut_TriggerPusher_Canon_EOS_M50_1765999437.stlSTL · 1.8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #96804
- Category
- Dụng Cụ Tiện Ích
- Published
Description
I recently bought myself a device to track stars (Omegon Montierung Mini Track LX3).
So now I had the problem with my Canon EOS M50, that it only has a wireless remote (optional), but not a plug to plug one in with a cable to shoot multiple photos in a row. Without having to stand next to it instead of having to do it all manually with the wireless.
I found solutions online which required a modification to the hardware which I didn't want to do. Soldering and stuff...
So I thought up this little device...
~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~
You need:
- 2x M3x16 countersunk screw
- 2x M3 flat square nut
~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~
ColdShoe version is, so you can store your HotShoe Cover while using it.
I also included the Fusion360 and STEP files for anyone who wants to modify them to fit their own setup. -> The Fusion360 file includes the M50 dummy. You only have to make it visible.
And IF you modify it, please share it :)
Credit to Luke Pamula for the Canon EOS M50 dummy. https://grabcad.com/library/canon-m50-mirrorless-camera-1
~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~
First Layer height 0,3mm
rest 0,12mm
At First, the threads are really hard going -> clean up the thread a little bit and also use some Teflonspray if necessary.
~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~ ֍ ~
Every STL is already rotated so it is print-ready.
If you print the version with the Cold Shoe... do a brim ;-)
+make pictures and post them!!
+Have fun printing it & doing some great long time exposures with it :)
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
Fine
Infill:
30%
Filament:
Vertigo Grey
Notes:
First Layer height 0,3mm -> rest 0,12mm
Category: Camera
Print spec
- Formats
- f3zpdfstepstl
- Model files
- 11
- Total size
- 22.6 MB
- Largest file
- 4.6 MB
0 comments
You may also like 12 models
See all-
New -
New -

-

-

-

-

-

-

-

-
New -


