Đế nam châm cho camera Wyze OG khung XL

If you use the Wyze OG webcam on the XL you might want to mount if on the frame, and magnetic mounting is the easiest. So this is magnetic mount that uses a 25mmx3mm ceramic coated magnet. The multi-material is probably way overkill (but hey we own a 5-tool 3D printer so we love overkill) so I printed the core with TPU and the outside with simple PLA. The M3 holes on the top are tap-size (either tap them or self-tp with the screw - I used M3x3 countersunk hex head screws but I bet regular button head would work fine). I put a pause in where the upper part starts to be able to put the magnet in (there is some extra space above the magnet. I used one of the plastic spacers that came in the package below the magnet to make the top flush so the PLA has something to rest on. (you could probably use the paper ones that also come in the box to do the same). 

to assemble put the sliding mounting plate that comes on the camera on top of this print and screw the 2 screws snug (it's not heavy so you don't need to go nuts tightening them or you'll strip) and then this sits right on the ends of the arms of the XL (or any other magnetic thing you want to mount the camera on). The second render has the PLA part set to transparent so you can see the TPU part inside. The knobs up top are to allow the TPU to be mechanically locked in the part since PLA and TPU don't stick to each other.

I included the project file for a 5T XL (I have no idea why I loaded TPU in tool 4, but I did, so you'll need to adjust to your setup). Leave the infills as they are.