Mô hình RC RQ-4B Global Hawk

This is my 1:16 Scale RC Global Hawk drone model. 
This project is a continuation of my Ardupilot series and it combines many new interesting solutions like V-Tail, Flaperons, Skis and Electric Jet Thruster. It was also my first time building such a large plane, so I might have messed some things up. The whole Global Hawk weighed around 1200 grams with 5S Battery and 1500 grams after adding the Skis and balance bolts at the rear. With the EDF able to produce more than 2kg of thrust I had assumed there would be no problems with taking off, but it seems I was wrong. It’s possible that the Li-ion batteries together with weak ESC were limiting the thrust, or maybe the shape of tail was pointing the thrust downwards due to Coandă effect.
But most likely it just needs a long and smooth runaway and proper landing gear in order to achieve take off speed. I will definitely revisit this project once the snow melts, but if you want to try and build it yourself here you got the whole Fusion 360 CAD project.

For more details check out my YouTube video: 

Parts List :

1x Mateksys F405-SE Flight Controller

1x QX Motor 64mm EDF QF2822 2400KV

2x LittleBee-Spring 30A ESC

4x MG-90S Servo

1x 5V BEC for Servos

1x M10Q 120 GPS with Compass

1x ExpressLRS EP1 RX and ES24TX( RC 2.4Ghz )

1x ExpressLRS GEPRC RX and BETAFPV ELRS Micro TX 
( Mavlink Airport Telemetry 915Mhz )

1x 4-6S 3000mah Li-ion battery pack

2x 200mm Push Rods

2x Carbon Rod 6mm x 370mm ( for Wing Spar )

5mm XPS Foam Sheet

Balsa Wood ( 8mm for Ribs, 5mm for Wing Spar and 4mm for V-Tail)

Tape

Hot Glue

Ardupilot Configuration for this plane was very similar to my recent Plank: https://www.printables.com/model/577694-rc-plane-ardupilot-flying-plank-flying-wing
You just need to change the parameters I talked about in my video.