
Móc Treo Nam Châm
- Downloads
- 29
- Likes
- 8
- Views
- 318
- Remixes
- 0
- Comments
- 0
Files 2 427.1 KB
- neo_2_magnet_hook_10mm_depth_v9_1765623278.stlSTL · 222.5 KB
- neo_2_magnet_hooke_16mm_depth_v2_1765623279.stlSTL · 204.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #95629
- Category
- DIY
- Published
Description
Why?
I was annoyed having my rulers and callipers lying around and taking up valuable space. I have a number of magnetic surfaces (shelves, whiteboard etc.) so decided to design this.
Design Info
The magnets are 10mm in diameter and 3mm in-depth, they fit quite tight into the hook, I haven't had to use glue in the 12 or so I have printed and in use right now.
Note, evenly apply pressure when pushing the magnets in as you can snap the hook; been there done that more times than I'd like to admit :)
There are 2 depth sizes, as you see in the pictures the deeper one (16mm) fits the “thicc” part of the callipers as a gauge/reference size and then of course the less deep one too (10mm).
Printing Info
- Print on its side
- No supports required
- Higher infill to reduce the % chance of it snapping when inserting magnets
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 427.1 KB
- Largest file
- 222.5 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-

-

-


