
Bộ chuyển đổi M-05 dài 257mm - Tamiya FF-05
- Downloads
- 79
- Likes
- 12
- Views
- 1,005
- Remixes
- 0
- Comments
- 0
Files 7 621.6 KB
- C18_top_link_1765734492.stlSTL · 31.9 KB
- extension_left_1765734493.stlSTL · 64.7 KB
- extension_right_1765734493.stlSTL · 71.5 KB
- D2_brace_1765734494.stlSTL · 86.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #94681
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
This is my model inspired by FF-02.
I recommend printing from PETG, 4-5 perimeters, 0.2mm layer height. The chassis brace parts require supports, other parts can be printed without supports.
The base for the model is an M-05 in L configuration (239mm), stretched by 18mm using a chassis extension piece and extended top braces.
It uses Tamiya TL-01 arms (#50737) and 39mm dogbones (#50883) to increase the width to 180mm. It should be possible to use GF-02/Comical buggy arms with 45mm swing shafts for 190mm width, aswell as YR long span suspension for GF-01/WR-02 for improved suspension geometry, but these configurations weren't tested and may require additional modifications.
The rear axle can be build as per manual using TL-01 parts, the front axle requires a 3D printed top links (or adjustable top links), top damper mount (included in files) and longer steering links (you can replace the short ball cups with long #50875 or #53601 to get the right length)
The long steering link has to be extended by 18mm - you can make your own using an M3 threaded rod.
The model is still work in progress. I haven't tested position of body posts on pre-drilled Tamiya bodies. The model was designed for the V.2 chassis, but it's compatible with V1.
UPDATE:
Added a new version of the D3 part that provides more clearance around the steering link.
Print spec
- Formats
- stl
- Model files
- 7
- Total size
- 621.6 KB
- Largest file
- 164.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-
New -


