Giá đỡ cuộn dây tự động với tùy chọn quay lại bổ sung

The only feature missing in this stand design is a possibility of an additional rewind when the track reaches its lowest position. It is not necessary during a normal print but it’s useful during rewinding a filament back to the spool before you change it. In cooperation with the author of this stand design we prepared a modified track part which provides this functionality.

This modified track part is equipped with a spring on its bottom end and a longer neck on its top. The spring holds the track in the working position with its teeth engaged but also allows its further movement where its toothless area stands against the gear and allows its free rotation. Watch the video with this track in action. https://youtu.be/Gp9KecYa2sk

You will need a suitable spring. I’ve found the right one in an old ballpoint pen. The spring dimensions are 4.6 x 30 mm. No other changes to the stand design are necessary. Just use this modified track part.

12.7.2019 Another video showing the spring track in action while rewinding a filament back to the spool. https://youtu.be/vX8K0OM5W3g

3.8.2019 Another spring track version based on the Track 1.2 version.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0,3

Infill:

15% gyroid

Filament: Filament PM PLA Copper Post-Printing =============

Put the propper spring to the hole on the bottom of the track.

Category: 3D Printer Accessories