Satsana cho Creality CR-10s PRO V2

By Randeng_961038

Downloads: 57
Likes: 3
Views: 489
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 2.5 MB· 2.5 MB

Files 4 2.5 MB

Satsana_CR10_-_WireCover_1765725002.stlSTL · 4.6 KB
Satsana_CR10_-_FanCover_1765725003.stlSTL · 16.7 KB
Satsana_CR10_-_BLBracket_1765725003.stlSTL · 155.5 KB
Satsana_CR10_-_Body_1765725004.stlSTL · 2.3 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #91630
Category: Máy In 3D
Published: 12/14/2025
License: Creative Commons — Attribution — Noncommercial — Share Alike

Description

Remixed to fit the Creality CR10s PRO V2, with BL-Touch and a 5015 part cooling fan.
Made to fit heated inserts instead of hex nuts.

Optimized fan duct for better part cooling.

Print Settings

0.20mm layer height, 25% infill, no supports, PLA works fine.

Assembly:

Use two M3 heated inserts to mount the part cooling fan and one for the BL-Touch bracket.

Remove the original hot end cover and BL-Touch bracket.
Mount the fan duct to the back plate using the original mounting holdes at the top, and one of the holes for the original BL-Touch bracket with a nut on the back side. Make sure the nut dont touch the X-axis 2020 aluminium bar.
The BL-Touch is mounted with the circuit board outwards.
Note that the 5015 fan could be a tight fit.