
Máy In 3D
Giá đỡ động cơ Z cho SV06 (độ vuông & độ cứng)
- Downloads
- 392
- Likes
- 85
- Views
- 3,955
- Remixes
- 1
- Comments
- 0
Files 3 60.1 MB
- SV06_Z_motor_mount_v4_1765721420.stepSTEP · 724.8 KB
- Z_motor_R_1765721422.stlSTL · 34.8 MB
- Z_motor_L_1765721428.stlSTL · 24.6 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #90730
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
From the original :
- Sacrificial layer for screw holes
- Added chamfer
- External side reinforcement support
- Full infil for the back and underside (near the 90° angle)
Needed for the build :
- 8 heat inserts M4x6x6
- tip = if your parts are fine, you can re-use the ones from your original parts (at your own risk if you make something wrong so be sure!)
1 - Be sure everything else is correctly assembled and square (this mod is not magic)
2 - Ensure to print with a well tuned printer and calibrate the flow especialy for the 8mm hole (even if tolerences are used you want to be max 0.1mm at the right sizes)
3 - When goes to reassemble the gantry, takes your time and few or too much mesurments, it's the best moment to do that;)
Printing parameters :
- Use at least PETG, best are ASA, ABS or ABS+ (don't use PLA / PLA+ steppers can go hot depending your configuration)
- 0.4 nozzle
- 0.2 mm layer
- 4 perimeters
- 5 top min
- 5 bottom min
- Infill 30% gyroid min
Happy printing!
Print spec
- Formats
- stepstl
- Model files
- 3
- Total size
- 60.1 MB
- Largest file
- 34.8 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-
New -
New -
New -

-

-



