Vỏ webcam NOIR cho Raspberry Pi Zero với quạt 40mm

This is a Case designed for a raspberry pi Zero, an NOIR camera module from Piomoroni and a 40mm 5V Fan.

The used PI Camera Module: https://shop.pimoroni.de/products/night-vision-camera-module-for-raspberry-pi

The 40mm 5V fan is recommended since the IR LED produces a lot of heat when running permanently. It also allows to overclock the pi-zero board without thermal problems. Heat sinks for the IR-LED and the PI ZERO cpu is recommended.

My camera is running the "motioneyeos" linux distribution as a operating system. https://github.com/ccrisan/motioneyeos/wiki

Additionaly I have added a simple reed-Relais to a GPIO pin to switch the IR-LED on and off via the web-browser using action-buttons https://github.com/ccrisan/motioneyeos/wiki/Action-Buttons

On user request I have added the STEP Files to the download sexction to enable easy remixing.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

15%

Filament: 3DJAKE ECO PLA PLA Green How I Designed This ===================

For assembly you need:

4 screws M2,5 x 8 for the front plate assembly

4 screws M3 x 15 for the fan assembly

4 screws M2 x 12 for the camera assembly

1 screw M3 x 30 with nut for the stand

The IR-LED are fixated with hot-glue or super-glue

Category: Electronics