
Giá đỡ ngăn kéo Bambu AMS cho máy in 3D
- Downloads
- 996
- Likes
- 286
- Views
- 8,629
- Remixes
- 1
- Comments
- 77
Files 25 6 MB
- left_X_1_1766390421.stlSTL · 197.3 KB
- right_X_1_1766390422.stlSTL · 197.3 KB
- behind_X_2_1766390423.stlSTL · 3.8 KB
- drawer_X_2_1766390424.stlSTL · 9.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #8674
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
Slowly tap into the interference fit with a wooden hammer. I printed in PLA, not ABS, it warps. I have uploaded my parts and location for your reference. I increased the padding of the handle, 15% is too small. I already broke one, 45% filled reprint. Do not mistake the installation direction, it is difficult to disassemble after installation. Turn off "Flow Calibration" when printing as it will affect the printed part.
If you're going to put it on top of the printer,don't print first, I am designingplaced on the printer, testing and uploading. I originally designed this to sit on a desk. If placed on the printer, it will interfere with the screen and cover handle.
This version is an early design and I recommend printing the version below.
on the printer:
https://www.printables.com/model/465919-put-on-the-printer-bambu-ams-drawer-stand
Print spec
- Formats
- 3mfstlstp
- Model files
- 25
- Total size
- 6 MB
- Largest file
- 3.2 MB
77 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-



