
Căng dây curoa X cho Malyan M150
- Downloads
- 14
- Likes
- 2
- Views
- 139
- Remixes
- 0
- Comments
- 0
Files 3 1.7 MB
- x-belt_tensioner_for_M150_-_linear_1766003372.stlSTL · 581.5 KB
- x-belt_tensioner_for_M150_v1.1_1766003373.stlSTL · 930.7 KB
- sliding_block_v1.1_1766003374.stlSTL · 229.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #86603
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
I looked at some solutions for wanhao and similar i3 clones like http://www.thingiverse.com/thing:1672640 and the remixes but they all don't really fit Malyan M150 properly as M150 comes with 3 linear bearing blocks that are different in size from Wanhao (and especially different from those upgrades ppl put on Wanhao) hence all the files I tried didn't really work. I tried editing them but it's tedious work to edit STL (why don't ppl upload source files still is beyond me) so I reworked it from scratch .. so it is similar to /thing:1672640 but it properly fits Malyan M150. It also works perfectly in conjunction with http://www.thingiverse.com/thing:1906153 :)
NOTE: DO NOT OVER-TIGHTEN YOUR X BELT! When you plan to change the X belt tension do that when the X assembly is at the bottom or at the top of the printer, do not tighten too much as you can easily bend the Z guide rods! Especially if you are increasing tension while X assembly is at the middle of the Z!!
Print Settings
Printer:
self made
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.25mm
Infill:
30%
Notes:
there's a thin wall 0.4mm on the object. Print using 0.4mm "line" or configure your slicer to detect thin walls, anyhow even if that thin wall is not printed at all (as if you don't detect thin wall and your slicer is configured to print with larger line then 0.4mm it will be ignored) the part is still 100% functional!
main tensioner block is properly rotated for printing, sliding block you have to rotate 180 degrees (around x or y) so that screw head hole prints properly.
How I Designed This
onshape
onshape source of the whole project available: https://cad.onshape.com/documents/7cb155e953d26af39c1b9508/w/cac13f9b8a666666c8f0e621/e/8dbd92b8547ecb7d5ffd2531
Category: 3D Printer Parts
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 1.7 MB
- Largest file
- 930.7 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -
New -
New -

-

-

-

-


