Skip to main content
F3D
Hộp đựng đồng hồ RLC 1

6 images

DIY

Hộp đựng đồng hồ RLC

By arhi_585078

Downloads
20
Likes
2
Views
275

Files 7 2.7 MB

  • jezik_1765995637.SLDPRTSLDPRT · 533.5 KB
  • Poklopac_1765995638.STLSTL · 300.3 KB
  • jezik_1765995638.STLSTL · 23.5 KB
  • rlc_1765995639.SLDPRTSLDPRT · 997 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#86595
Category
DIY
Published

Description

Box for RLC meter designed by Nikita Afanasyev. It is made to fit the PCB designed by Aleksandar Krstic (pcb rev1.0)

The link for the RLC meter (description of use, schematic, firmware, discussion): http://radiokot.ru/circuit/digital/measure/108/

The link for the PCB's: http://dirtypcbs.com/view.php?share=6586&accesskey=cad38a0e9484b06ec39b33055847b133

This is the best DIY RLC meter available today so I strongly suggest you make yourself one if you don't already have a proper RLC meter :)

SolidWorks source files available with STL files

Instructions

RLC.stl is the main body of the box. I print it as it is (top of the box up) with support inside the box, depending on the type of your machine you might want to remove the embossed letters on the top face and print face down, it will save you some plastic, no support mess to clean etc..

poklopac.stl is the bottom cover of the box. Print it on the side to have max strength of the hinge. print with 100% infill (or less if your machine is not calibrated properly)

jezik.stl is the lip, the leg that allows you to hold the case at some degree up, it latches to the hinge on the bottom cover, also print on the side for max strength, if you print flat it will break when you try to latch. print with 100% infill (or less if your machine is not calibrated properly)

Video showing lip function (note this is before the final print so here the bottom cover is manually cut to find the proper dimensions and the lip is 5mm shorter then in final version) https://youtu.be/GEYoMIFXufg

Category: Electronics

Read more Show less

Print spec

Formats
pdfsldprtstl
Model files
7
Total size
2.7 MB
Largest file
997 KB

0 comments

See all