Skip to main content
F3D
Vỏ bảo vệ mỏng cho bộ điều khiển Pixelblaze V3 1

4 images

DIY

Vỏ bảo vệ mỏng cho bộ điều khiển Pixelblaze V3

By GeekMomProjects

Downloads
70
Likes
13
Views
404
Comments
1

Files 10 12.4 MB

  • Basic_Case_Body_1766318636.stlSTL · 703.5 KB
  • Basic_Case_Lid_1766318637.stlSTL · 1.5 MB
  • Button_1766318638.stlSTL · 424.3 KB
  • Basic_Case_Body_with_USB_Hole_1766318639.stlSTL · 974.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#8455
Category
DIY
Published

Description

**UPDATE August 23, 2023**

Users reported that in some cases there isn't enough clearance between the Pixelblaze and the lid for the button to operate properly, and it can be triggered accidentally by tightening the screws. , I have added extra versions of the case body whose name ends in “Extra Clearance”. These versions are 1 mm taller than the original design, and should eliminate this issue.

** End Update **

A simple protective case for the Pixelblaze V3 board that allows access to the screw terminals. The  3D printed button fits inside the corresponding hole in the lid, and when pushed, presses the button on the Pixelblaze board.  10mm or 12mm M2 screws and nuts hold the lid onto the case.

In addition to the basic case, there is a version which helps provide strain relief for the wires coming out of the screw terminals by clamping the wires between the lid and the case.

I successfully printed in PLA, but would recommend PETG for the version with strain relief as the screws will put tension on the thin lid.

Read more Show less

Print spec

Formats
stl
Model files
10
Total size
12.4 MB
Largest file
1.9 MB

1 comment

See all