
Mount E3D Roto cho Voron V0
- Downloads
- 48
- Likes
- 7
- Views
- 950
- Remixes
- 0
- Comments
- 0
Files 2 761.4 KB
- Roto_V0_Mount_1765693924.stlSTL · 261.5 KB
- Roto_V0_Mount_1765693924.stepSTEP · 499.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #82572
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
This is a mount for the E3D Roto on a V0 printer! It's a modified version of the mini stealth burner mount.
Print Settings:
I recommend using organic supports just in the area that holds the belts. I printed with CookieCad PETG with 40% infill.
Required hardware:
- E3D Roto
- 2x M3x10
- 4x M3 Headset Inserts
Other modifications:
You will need to move the Z rails and possibly cable chain up to allow the bed to get close enough to the nozzle.
Assembly:
Remove the 3d printed metal heatsink from the Roto and use the two M3x10 screws to attach the stepper to the x carriage. After this attach, the heatsink onto the stepper following E3D's instructions. When attaching the heatsink make sure the belts stay out of the way!
Note:
You do loose a bit of build area, especially if you want to keep the door closed to the printer. The next thing I will design is a good part cooling solution to prevent it from taking up to much room. I may also try to modify the mount a bit more to reduce the loss of build area even more.
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 761.4 KB
- Largest file
- 499.9 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -
New -

-
New -
New -

-


