SlideDrive - Đế gắn ổ cứng gắn ngoài cho Laptop

A slim mount to allow you to attach and detach an external hard drive from the back of your laptop (of course you could use this mounting system for a lot of things, but this is what it was designed for.)

Lock Dimensions: 50mm x 65 mm x 2.8 mm

If you want a more polished version of this device I recommend you go here: https://www.kickstarter.com/projects/driveslide/driveslide-a-secure-home-for-your-laptop-accessories

With that said, I needed the product now, and I didn't need something quite so luxurious, so I made my own.

Both items can be affixed with double-sided tape or hot glue. (note: on laptops like Surfaces where the internals are in the back of the machine, hot glue will not work very well because the heat from the computer's internals will remelt it during use.)

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Yes

Supports:

Yes

Resolution:

200

Infill:

20

Filament: MH build Black PLA Black

Notes:

I recommend turning the Key up on its side for printing so there is as little support material in the gap as possible.

supports on the Lock help the little latching tab print properly but will need to be broken free before use.

Category: Computer