Skip to main content
F3D
Hộp Đựng Băng Keo SMD 1

1 image

DIY

Hộp Đựng Băng Keo SMD

By MattWilde_295702

Downloads
663
Likes
136
Views
4,203
Remixes
2

Files 7 326.7 KB

  • SMDPaperTape-Body_1766003153.stlSTL · 30.8 KB
  • SMDPaperTape-Rail-x6-60p8mm_1766003153.stlSTL · 6.5 KB
  • SMDPaperTape1mm-Rail-Test-XYFit_1766003154.stlSTL · 6.5 KB
  • SMDPaperTape-Rail-x8-81mm_1766003155.stlSTL · 6.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Description

Summary

This SMD Component holder/box system was inspired by several other SMD storage projects (Links at the end).

Overview

A SMD component storage system that consists of two printable parts:

  1. The component holder. Holds a "tape" of up to 100 SMD components.
  2. Organizer rack. Organizes the component holders into logical racks (e.g. One E-Series per rack, or 1 Project per rack).

Main design goals for my design was

  • A system that works well with prototyping and small projects
  • Zero-effort "installation"
  • Easy to dispense components
  • Easy organization / overview of components
  • No risk of having components "spill out"
  • Easy to print, No additional screws/etc

Printing Instructions

You'll need a decently tuned printer in order for the holder to fit well onto the rack.
Recommend you follow the following procedure for printing:

  1. Print 1 holder
  2. Print the "Rail-Test-XYFit"
  3. Check that the holder snaps nicely into the rack => Your printer is well tuned.
    3b. If it doesn't snap nicely in:
    • Recommended option: Tune your printer so it's dimensionally accurate.
    • Backup option: Tune the "Rack" so that there's more clearance towards the Holder. FreeCAD 3D file included.
  4. Print 7 more holders. Hold them tightly together and measure the length => Should be under 81mm.
  5. Print the 8-Slot Rack 81mm Rack. Check that the 8 holders fit in nicely.

I've included some common Rack Lengths (6-Slot, 8-Slot, 10-Slot, 12-Slot).
If you want a customized Rack length, it's really easy to edit it in FreeCAD. Masterfile included. Just change the "Rail => CenterProfile => Length" Property. Length = 0.2 + 0.1_N + 10_N; N is the number of Slots

Related

If you want to see what kind of electronic projects that have been created with this, please visit:
https://www.protoriam.com

Inspiration

"SMD Component Strip Holder & Dispenser" by tth:
https://www.thingiverse.com/thing:3804430
"Big SMD Component Strip Holder / Storage" by Hedelinoo:
https://www.thingiverse.com/thing:4030802
"SMD Component Magazines" by robin7331:
https://www.thingiverse.com/thing:3952021
"SMD Component Magazines with Label Slots" by MacroYau:
https://www.thingiverse.com/thing:3997344
"Mx SMD component strip holder" by Maxint:
https://www.thingiverse.com/thing:2186862

Read more Show less

Print spec

Formats
fcstdstl
Model files
7
Total size
326.7 KB
Largest file
263.2 KB

0 comments

See all