Skip to main content
F3D
Nắp Luồn Dây Cáp Mỏng 1

3 images

Đồ Gia Dụng

Nắp Luồn Dây Cáp Mỏng

By TheoFieber_1103940

Downloads
42
Likes
2
Views
305

Files 6 3.7 MB

  • Grommet_3mm_hole_1765650223.stlSTL · 659.8 KB
  • Grommet_2x_3mm_holes_1765650225.stlSTL · 688.9 KB
  • Grommet_light_hole_1765650226.stlSTL · 661.2 KB
  • Grommet_Bolt_1765650227.stlSTL · 702.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I wanted minimalistic cable grommet so I designed my own.

Is is screwed from the inside/underneath through your desk or furniture. You'll need to make a 15mm hole.

It is a very quick and simple print. The tolerances are very large, it will be snug after manually tightened. Depending on the force you put, the cable cable be held in place to stay secure. 

If your cable is too large, you can scale the model or just drill the grommet to you specific diameter. 

If you have usb type A cables that have to go through the bolt, I added two bolts with squares holes. 

  • Small : 13.5mm * 5.5mm (smallest Apple charger) 
  • Large : 15mm * 7mm (Larger Apple charger for apple watch). 
     

For the grommet, 3 sizes are available : 

  • 3mm hole which fit the Apple lightning charger
  • 2 times 3mm hole. 
  • And a light stand wire hole. It fits my ikea (quite standard) wire. 

The grommet is quite long, you can shorten it to fit your needs, by slicing in PrusaSlicer.

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
3.7 MB
Largest file
702.5 KB

0 comments

See all