
Mặt dây chuyền trái tim nhảy múa
- Downloads
- 188
- Likes
- 98
- Views
- 771
- Remixes
- 0
- Comments
- 0
Files 2 11.2 MB
- DancingHeartsPendant_1767465639.stlSTL · 5.9 MB
- TinyDancingHeartPendant_1767465640.stlSTL · 5.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #81091
- Category
- Trang Phục - Phụ Kiện
- Published
- License
- Creative Commons — Attribution
Description
Works best on a printer with good resolution to allow the hearts to slide freely when printed. Mine slide right away once the brim is removed. I printed the pendant at 0.2 mm layer height with an outer brim to keep the small pieces in place. I set the fill pattern to “concentric” for the top and bottom layers. A color change in the last two layers (0.4mm) gives the small hearts and the large heart outline a nice “pop” of color.
Update: Just added a 50% scale version (TinyDancingHeartsPendant.stl) that will be tricky to print, but worked for me with the following settings:
- 0.08mm layer height
- inner and outer brim - with 1mm brim width
- concentric fill pattern for top/bottom layers
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 11.2 MB
- Largest file
- 5.9 MB












