Crocs Chain Charm (Print-in-Place) – Sợi xích charm kẹp cho Crocs

Add some unique style to your clogs with this Print-in-Place Crocs Chain Charm!

This 3D printable chain is designed to clip directly onto the side rivets/straps of your Crocs, giving them a bold, streetwear, or punk-inspired look. The model is completely flexible right off the print bed—no assembly required!

Features:

• Print-in-Place: Fully articulated model printed as a single piece.

• Easy Customization: Print it in vibrant colors like pink or yellow (as seen in pictures) to match your vibe.

⚙ Recommended Print Settings

• Material: PLA, PETG, or TPU (if you want an even more flexible chain).

• Layer Height: 0.12 mm

• Infill: 15% - 20% (Gyroid or Grid)

• Perimeters / Wall Loops: 3 (recommended for extra strength on the links)

• Bed Adhesion: If you experience any lifting with the small chain links, using a Brim is highly recommended.

I also suggest adding supports as shown in the photo; you can easily do this using the "add supports manually" function in your slicer, drawing them right where the chain will rest on the print bed.