[V-Core 3] Ốp nguồn McAbra

This PSU cover is made for V-Core 3's back panel. You use M5 screws to attach the clips to the panel and M4 screws to attach the PSU to the clip. The cover itself requires M3 x D4.6 x L4.0 heat inserts and M3 screws.

I used it on Meanwell RSP-200-24 PSUs but it should also fit RSP-320-24 and similar LRS models.

The attached PDF might help with the assembly. Printing half of it on a A4 paper will allow you to project the holes to your panel.

You can hide the SSR there and the through-hole for the bed cables thus hiding all AC inside the box.

Hardware BOM

Item

Qty

Printable

AC Cover

1

Yes

PSU Clip

4

Yes

M5 x 12mm

4

No

M4 x 8mm

4

No

M3 x 12mm (slightly longer will also fit)

6

No

M3 x D4.6 x L4.0

6

No

IEC Socket

1

No

Zip ties

3-6

No

Disclaimer, I'm not an electrician, I have no idea if this is safe. Be very careful when doing anything with or around AC wiring.