Prusa MK3S Filament Guide v2.0

By Guyzerr

Downloads: 243
Likes: 25
Views: 1,134
Remixes: 0
Comments: 24

Download all (.zip)· 2 files · 3.6 MB· 3.6 MB

Files 2 3.6 MB

Prusa_MK3S_Filament_Guide_v_2.0_0.2mm_PLA_MK3S_1h37m_1767896689.gcodeGCODE · 3.4 MB
Prusa_MK3S_Filament_Guide_v_2.0_1767896688.stlSTL · 162.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #78246
Category: Máy In 3D
Published: 04/18/2025
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: filementguide

Description

*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. ***

I ran into an issue with the guide when printing at almost the max Z settings on my Prusa Mk3+. The filament wasn't able to move freely enough for my liking so I took the liberty of making a few modifications. I lengthened the main arm almost 3", bent it at about a 15 degree angle and put it all back together. This allows for the holder to clear the roll of filament and get it out of the way allowing for free side to side movement. The filament is also guided in almost a straight path to the extruder. I printed it in generic PLA without any raft or brim. 15% infill.

Dec 1/21…. Removed original guide and uploaded a much improved one. It now grips the cross member and snaps into place.