
Khối chà nhám chắc chắn và đơn giản cho máy in 3D
- Downloads
- 110
- Likes
- 22
- Views
- 763
- Remixes
- 0
- Comments
- 2
Files 2 330.6 KB
- 457x75_-_Cl_1766108114.stlSTL · 122 KB
- 457x75_-_Bloc_1766108115.stlSTL · 208.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #7609
- Category
- DIY
- Published
Description
Sanding Paper is expensive and don't last that much. Sanding belts are affordabe and pretty strong because they need to hold a lot of torque and speed. Sanding belts last a very long time because they have a strong fabric back. That's the perfect accessory for sanding blocks.
I wanted a simple sanding block, perfectly stiff and strong, not too long to be printed with not muck filament consuming through. Two simple parts interlocking that makes a pretty good tool by the way...
Operating manual in real time ^^ : http://youtu.be/YRtQ1YqoEB8
The original model is meant to be used with 457x75mm belts (Bosch, Makita, Skil, Black & Decker, Parkside...), but you can easily scale it for other belt size, just do the maths.
Print Settings
Printer:
Prusa I3, Tarantula, CoreXY, FLSun Delta.
Rafts:
No
Supports:
No
Resolution:
does not matter
Infill:
none = 100% perimeters
Notes:
Plan on perimeters only for strenght and fast printing. The parts are optimized for 3 perimeters out of a 0.4mm nozzle. (3 inner + 3 outer) Enjoy.
/!\ no inflill does not mean you want the part hollow. You print faster with better mechanical properties with 100% perimeters, with the part optimized as said above for 3 perimeters with a 0.4 nozzle.
Category: DIY
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 330.6 KB
- Largest file
- 208.7 KB
2 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-
New -

-


