Skip to main content
F3D
Block Xả Dầu Rời Cho SRAM Apex 1

1 image

Thể Thao & Ngoài Trời

Block Xả Dầu Rời Cho SRAM Apex

By Marko2402_1505255

Downloads
17
Likes
1
Views
299

Files 5 1.8 MB

  • sram_bleed_block_1765634241.scadSCAD · 1.4 KB
  • sram_bleed_block_11mm_1765634242.stlSTL · 327.8 KB
  • sram_bleed_block_10mm_1765634243.stlSTL · 486.8 KB
  • sram_bleed_block_9mm_1765634244.stlSTL · 500.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I use these for my Apex 1 equipped Gravel Bike.

I found that I needed thinner bleed blocks to remove some of the squishy feeling that SRAM brakes tend to have. Using a thinner block leads to overfilling of the brake lines with brake fluid, so the pads sit nearer to the discs and brake feel is a bit more direct, but the brakes are more prone to rubbing on the rotor.

The block is designed so it can be used in 4 orientations. The thickness is debossed on top of the part.
The 4 holes can be used with the brake pad screw to prevent the block from slipping out during the bleed procedure.

Possibly useful for other SRAM brakes as well or even other brake manufacturers with some changes to the scad file.

Read more Show less

Print spec

Formats
scadstl
Model files
5
Total size
1.8 MB
Largest file
550.7 KB

0 comments

See all