
Mount cho Eryone Thinker SE gắn BTT SKR Mini E3 V3
- Downloads
- 30
- Likes
- 6
- Views
- 436
- Remixes
- 0
- Comments
- 2
Files 1 101.5 KB
- Eryone_Thinker_SE_SKR_Mini_E3_V3_mount_1765597528.stlSTL · 101.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #74280
- Category
- Máy In 3D
- Published
Description
After swapping the original board of my Eryone Thinker SE with an SKR Mini E3 V3 I found myself in need of mounting it. This model allows placing the new board on the same location of the old board, but removes the ability of reinstalling the front aluminum plate (which is not a big deal as I have never gotten any debris on the board.
Use a high infill (40%) to make the four pillars more robust.
Route the cables as follows:
- everything that goes to the toolhead goes between the left pillars
- lcd connector and power cable goes in the front
- usb cable comes out of the back
- everything else goes between the right pillars
you don't need fans as it's an open air design, if your cables are too long ensure that they don't catch in the bed v-wheel
BOM:
- 4 M3x8mm bolts to secure the board to the bottom plate
- 4 M3x6mm bolts + 4 M3 T-nut to mount the plate to the extrusions
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 101.5 KB
- Largest file
- 101.5 KB
2 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-


