Skip to main content
F3D
Giá đỡ để bàn cho Vỏ chìa khóa đa năng 1

7 images

Large file collection Đồ Gia Dụng

Giá đỡ để bàn cho Vỏ chìa khóa đa năng

By PhilCaruso

Downloads
25
Likes
8
Views
324
Comments
2

Files 25 43.3 MB

  • UKCdeskHolderX1-1c_0.4n_0.2mm_PLA_MK4_2h5m_1767375915.gcodeGCODE · 2.7 MB
  • UKCdeskHolderX2-1c_0.4n_0.2mm_PLA_MK4_3h30m_1767375916.gcodeGCODE · 4.1 MB
  • UKCdeskHolderX3-1c_0.4n_0.2mm_PLA_MK4_4h56m_1767375917.gcodeGCODE · 5.4 MB
  • UKCdeskHolderX4-1c_0.4n_0.2mm_PLA_MK4_6h18m_1767375918.gcodeGCODE · 6.7 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A collection of Desktop Holders for my previously published Universal Key Cover (https://www.printables.com/model/613681-universal-key-cover).  Includes holders for 1, 2, 3, or 4 keys.  These holders use inserts to allow color-coding to match your key covers or to provide a color that complements the holder.  All desktop holders use the same inserts as my previously published Wall-mounted Holders for Universal Key Cover (https://www.printables.com/model/637043-wall-mounted-holders-for-universal-key-cover).

Print any HOLDER (1, 2, 3, or 4 slots) and the same number of INSERTS (in any color or colors you like), slide the INSERT(S) into the HOLDER and place it on any flat surface.  Each HOLDER includes a tray for holding keys, glasses, coins, or whatever!

The provided STL files are intended to be printed in PLA (though PETG should also work fine) and do not require supports.

PrusaSlicer 3MF files are provided for generic PLA, and G-code files are provided for the Original Prusa MK4.  Input Shaper versions of the HOLDERS are also included (they have "IS" in the filenames).

The HOLDERS for Universal Key Cover keys seen in the photos were printed on an Original Prusa MK4 in Overture White and generic Silver Silk PLA with a 0.4mm nozzle at 0.2mm STRUCTURAL layer height using Input Shaper with a 5% Gyroid infill and a Concentric top fill pattern.

The INSERTS for Universal Key Cover keys seen in the photos were printed on an Original Prusa MK4 in various generic PLA brands and colors (some of it is silk PLA) with a 0.4mm nozzle at 0.2mm QUALITY layer height with a 100% Rectilinear infill and a Concentric bottom fill pattern.

Read more Show less

Print spec

Formats
3mfgcodestl
Model files
25
Total size
43.3 MB
Largest file
6.7 MB

2 comments

See all