USB plug v2

Physical size

18 x 12 x 8 mm

Compatibility

USB-A female connectors

Print info

Should be a semi-easy print overall. Most hardest part of a print for printer is the overhang but due to its minimal size, modern printers should not have a problem.

Material *

PETG; FLEX could be interesting

Layer height

0,1 mm + default variable

Infill

30 - 100%

Supports

default (not needed)

Nozzle

default (0,4 mm)

Duration

± 10 mins (Prusa MK3S - 100% speed)

• PLA only with brim. If you plan to print more pieces, then test the brim offset setting first (0,6 mm could be fine) for easy peel-off from a plug after print. Otherwise you'll need to use knife and thats annoying.

If you like my remix…

…please click "like", and post a make. This will help me to win some prusameters, and help other makers decide if this is a useful model. Thanks.