Kẹp chia Y mạnh mẽ cho máy in Bambu Lab

Why this Remix?

I really liked the Y-splitter for Bambu Lab's AMS unit that Ed Johnson published. I tried two previous Y splitters but they weren't as reliable / smooth as Ed's version with the PC4-M10 connectors.

The only thing I didn't like about that model was the retaining clip. I broke two of them. One split along the layer lines after test fitting the splitter just a few times. The second one broke when I actually installed it on the printer. While the original clip looked great and printed fast, I found them a bit too delicate.

I remixed this to be a thicker, stronger version that still fit the Y-splitter

Notes

Because I also increased the thickness of the slotted back plate (again, just wanted it a bit more robust), you will need a slightly longer M3 hex head screw versus the one used in the original model.

(1) M3 X 8mm hex head screw

My Print Settings

Because robustness/strength was the whole point of the remix, I went with:

3 wall loops

40% (Gyroid) Infill

0.20 layer height

Printer: Bambu Lab X1C with AMS

Time: about 20 mins with above settings

Post Your Makes / Follow Me / Check my Other Models

Post your makes and earn your Prusameters!

And if you like this model (or any of my others), I'd love it if you could “Follow” me to show your support.

If you haven't seen my other models, click on my profile icon and check them out. There are a variety of other practical prints you might be interested in.

Updates

Added the updated STEP file as well for those who want to further remix