Phiên bản cải tiến 'Brutus 3D Printer' mạnh mẽ

Brutus and Bonsai from Caelf are amazing and straightforward designs.
I want to take the best from both printers with some changes:

1. Increase rigidity
2. 235x235 print bed
3. updated BOM (mostly from Aliexpress)
4. tbc…

I will be updating this page as I progress through this project.

YevMod in the beggining of the file means that there is more than just new holes.

Changes so far:

1. YevMod_Z_Top_Bracket_Right:
   1. Extra holes for mounting at 2020 aluminium extrusion.
   2. Cut from the top so the X-axis can be lowered. Now you can use any length for the lead screw, and 4 pcs. aluminum extrusion 2020 can have any length as well.
   3. "_Right" only as this part is symmetrical, use the .3mf file if you can't mirror it.
2. Z_Motor_Mount:
   1. The original model had a coupler diameter of 22 mm, the outer diameter (OD) of some couplings can be not only 20, but also 25 or even 30 mm, so the cutout diameter of 22, 27 and 31 mm is loaded. Check .zip for all sizes. I will be using 27mm as I ordered 25mm couplers.
   2. In 27mm Right version thickness for the 10mm DIN912 M5 screw is 5mm, it was 4.5mm in the original design.
   3. Additional 4 holes are added for mounting.
3. YevMod_Y_Rod_Mount, YevMod_Y_Motor_Mount:
   1. Just small redesign from Bonsai, .STL uploaded as well.