
XY6020L enclosure
- Downloads
- 188
- Likes
- 11
- Views
- 1,698
- Remixes
- 0
- Comments
- 4
Files 4 175.6 KB
- hardware_1766278408.scadSCAD · 12.4 KB
- xy6020l_housing_1766278409.scadSCAD · 8.2 KB
- xy6020l_tray_1766278409.stlSTL · 56.9 KB
- xy6020l_housing_1766278410.stlSTL · 98.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #62240
- Category
- DIY
- Published
Description
I created a basic housing model for the XY6020L DC-DC converter. I came across the XY6020L adapter on the GreatScott! YouTube channel and decided to get one.
don't have a home lab, so having a portable housing for the device is incredibly useful for me, especially when I need the converter to trickle charge a car battery for a couple of days
BOM
Attaching the board to the tray:
4x M3x10mm bolts
4x M3 Nuts
Attaching the tray to the housing
4x M2x6mm bolts
4x M2 nuts
Print Settings
Minimum print settings: 15% infill and 2 layers everywhere. This will result in something workable.
Use more top and bottom layers to improve part quality.
Revision 1
Clips holding M2 nuts are now connected to the bottom of the tray, and not hanging off the alignment lip. Thank you @[email protected]
Print spec
- Formats
- scadstl
- Model files
- 4
- Total size
- 175.6 KB
- Largest file
- 98.1 KB












