Skip to main content
F3D
Hệ thống ống dẫn gió quạt đôi 5015 cho Ender 5 S1 1

2 images

Máy In 3D

Hệ thống ống dẫn gió quạt đôi 5015 cho Ender 5 S1

By Michael B Doherty B Doherty

Downloads
199
Likes
22
Views
1,420
Comments
12

Files 5 7.8 MB

  • oldfanduct_less_noisy_1768376477.stlSTL · 1.6 MB
  • oldfanduct_less_noisy_no_adxl_1768376478.stlSTL · 1.6 MB
  • oldfanduct_less_heavy_1768376479.stlSTL · 1.5 MB
  • oldfanduct_less_heavy_no_adxl_1768376480.stlSTL · 1.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#56892
Category
Máy In 3D
Published

Description

New version available, lowered the ducts to better aim. also removed the bottom half of the fan bracket, fan is only held by the top screws. This reduces the overall weight of the part as well as - for some reason unknown to me - makes the whole thing much quieter.

I was having cooling issues with a dual 5015 fan duct, so I developed this solution for a more direct airpath. 

It is loosely based on elPablo fan duct by NBR.

I added version with or without a space for a regular adxl, and version with and without the front fan support.

I printed it in ABS with the fan ducts pointing down and regular supports on buildplate only.

For assembly, the fan needs two m3x30 screws and the fans use m3 screws to the extruder. Note that the right fan requires a longer screw, as creality didn't bother to make things symmetric. Note that you should probably use a washer, the bottom supports are meant for m4 screws. All holes are direct thread.

Read more Show less

Print spec

Formats
stl
Model files
5
Total size
7.8 MB
Largest file
1.6 MB

12 comments

See all